Led Bars as blinders with fade out animation

Question

Hello, I am using six LED bars with 12 zones as blinder/strobes and would like to put the blinder on a fader and when The fader is no longer active it should fade out as an animation from the middle. Is that somehow possible and if so how? I would be very happy about an answer Emilian

psfb93 · Accepted Answer

Hi Emilian, 
 You could do this with a cue list: 
 Cue 1 - [Chans] At Full 
 Cue 2 - [Chans] 'Offset' 'Mirror Out' 'Delay' 0 Thru 1. Also [Chans] at Zero 
 Then assign the cuelist to an empty fader. In the Cue List Properties, set it to to a 'Manual' (Man) under Master, with the fader as a 'Master'. Also set 'Back from 1st' and 'Go from Last' as 'Wrap' 
 Each time you move the fader now the next cue will execute with manual time.

ueliriegg · Answer

you're using cells, right? so the syntax would be: 
 Chan 1 [.] {Offset} {Mirror Out} [Delay] 0 Thru 1

Led Bars as blinders with fade out animation

Top Replies