• State Verified Answer
  • +1 person also asked this people also asked this
  • Date
    emilian
  • Date
  • Replies 3 replies
  • Subscribers 189 subscribers
  • Views 708 views
  • Users 0 members are here

Led Bars as blinders with fade out animation

 Hello, I am using six LED bars with 12 zones as blinder/strobes and would like to put the blinder on a fader and when The fader is no longer active it should fade out as an animation from the middle. Is that somehow possible and if so how? I would be very happy about an answer Emilian 

Parents
  • +1

    Hi Emilian,

    You could do this with a cue list:

    Cue 1 - [Chans] At Full

    Cue 2 - [Chans] 'Offset' 'Mirror Out' 'Delay' 0 Thru 1. Also [Chans] at Zero

    Then assign the cuelist to an empty fader. In the Cue List Properties, set it to to a 'Manual' (Man) under Master, with the fader as a 'Master'. Also set 'Back from 1st' and 'Go from Last' as 'Wrap'

    Each time you move the fader now the next cue will execute with manual time.

Reply
  • +1

    Hi Emilian,

    You could do this with a cue list:

    Cue 1 - [Chans] At Full

    Cue 2 - [Chans] 'Offset' 'Mirror Out' 'Delay' 0 Thru 1. Also [Chans] at Zero

    Then assign the cuelist to an empty fader. In the Cue List Properties, set it to to a 'Manual' (Man) under Master, with the fader as a 'Master'. Also set 'Back from 1st' and 'Go from Last' as 'Wrap'

    Each time you move the fader now the next cue will execute with manual time.

Children
Related

www.etcconnect.com