martin roboscan 918 prism

We are looking at the profile now to see if there is a problem with it.   Right now, we are using the "custom" page as a place to drop control of multiple intensity devices.  Eventually, this is where you'll be able to define your own encoder layouts.  But even when that is done, if there is a problem with the profile, this won't fix it.

Back soon.

Thanks,

a

I have 4 roboscan 918s in my rig and have had no problems controlling the prism. It's in the beam parameters, or on the image encoders. The ML control shows them as Rot +/-/off Macros Off.

Edited to add. The virtual encoders appear to load strangely in 1.8.0. I'm not at the theatre so I can't verify the real encoders behave properly and load the prism controls on encoder 4, as I remember them doing.

I have 4 roboscan 918s in my rig and have had no problems controlling the prism. It's in the beam parameters, or on the image encoders. The ML control shows them as Rot +/-/off Macros Off.

Edited to add. The virtual encoders appear to load strangely in 1.8.0. I'm not at the theatre so I can't verify the real encoders behave properly and load the prism controls on encoder 4, as I remember them doing.

That's got it! 

Thanks!