• Date
    Ryan
  • Date
  • Replies 2 replies
  • Subscribers 183 subscribers
  • Views 3585 views
  • Users 0 members are here

Cue loads on restart

So I am programming a show right now with many cuelists (28 so far).  Heres the problem, last night took all my lists to cue 0, no prob everything turned off, shutdown the system as normal.  Came in this morning turned on master and noticed that 3 different lists had gone to cues on start up.  I'll see if I can reproduce this again after tonites shutdown, when we come back Friday hopefully these list wont start again.  Now i've been taking taking my lists to zero (Go to cue 40/0, 41/0, etc.)  Maybe if I just goto Cue Out that would be better.  But that shouldn't make a difference should it?   Isn't Cue 0 the same as Out.  I'd rather not goto Out because that also takes out the projection loops that are running, that the other programmer is running.

Thoughts?

Anyone else had this problem before???

Parents

  • I can't speak to why the lists are starting up with value, but Go to Cue 0 and Go to Cue Out do two very different things. Go to Cue 0 will take anything with an intensity to 0, but will leave any Non Intensity Parameters where they are. Go to Cue OUT will take everything out including NIP's. 

    So if you have a light with a scroller in blue. Go to Cue 0 will take out the lamp, but the scroller will stay in blue. Go to Cue Out will take the channel to 0 and the scroller to its home position. 

Reply

  • I can't speak to why the lists are starting up with value, but Go to Cue 0 and Go to Cue Out do two very different things. Go to Cue 0 will take anything with an intensity to 0, but will leave any Non Intensity Parameters where they are. Go to Cue OUT will take everything out including NIP's. 

    So if you have a light with a scroller in blue. Go to Cue 0 will take out the lamp, but the scroller will stay in blue. Go to Cue Out will take the channel to 0 and the scroller to its home position. 

Children
Related

www.etcconnect.com