Parked channels and blackout key/master fader

are you seeing the parked channels go to 0% on stage (or in real life)?

or just the intensity % in the Channel (tombstone) display?

the channel display will roll down with the grand master, but the actual intensity output should not change if there is a small white 'P' in the channel tombstone.

(you can pull down the GM, record a cue/sub/palette, and the recording will take the lower level; it won't record the actual output controlled by the Park command)

Andrew

Unfortunately it was one of my team not me which told me of this perceived problem. I will try to re-create this when I am next at the theatre and return to this post. Thanks for your help.

That does NOT sound like the intended behavior and is not what I see in our console and the manual clearly says parked channels are not affected by the grandmaster nor blackout. It would seem like the channels were probably not actually parked. 

Verified that this was not happening and is working as designed.

Thanks to Andrew & Jolson for their replies.