problem of Delay with the Sneak command

Hello

I am self_taught EOS operator and I have a problem of Delay with the Sneak command.

For example I would like to Sneak the channels 1 thru 6 at 50% in 2 seconds with a Delay of 0 Thru 5 seconds and an Offset mirror out (chan 3&4 go at 0 sec ; chan 2&5 go at 2,5 sec and 1&6 go at 5 sec).

I try various methods :

Chan 1 Thru 6 Offset Mirror Out At 5 Sneak Time 2 Delay 0 Thru 5 [Enter]

Chan 1 Thru 6 At 5 Sneak Time 2 Delay 0 Thru 5 Fan Mirror Out [Enter]

Group 1 At 5 Sneak Time 2 Delay 0 Thru 5 [Enter]

With the Group 1 with 3 subgroups like (3>4) (2 5) (1 6)

The result is the same :

Channel 3 go at 0 sec, Channel 4 at 1 sec, chan 2 at 2 sec, chan 5 at 3, chan 1 at 4 and chan 6 at 5 sec.

Is there an another method or an setup option for Delay command pack the channels whit the offset and don't spread the delay on all channels?

I work on ETCnomad EOS V3.2.6.29

Sorry but English is not my first language I hope it's clear.

JoLuX

Parents Reply Children
No Data
Related