Hello
I am self_taught EOS operator and I have a problem of Delay with the Sneak command.
For example I would like to Sneak the channels 1 thru 6 at 50% in 2 seconds with a Delay of 0 Thru 5 seconds and an Offset mirror out (chan 3&4 go at 0 sec ; chan 2&5 go at 2,5 sec and 1&6 go at 5 sec).
I try various methods :
Chan 1 Thru 6 Offset Mirror Out At 5 Sneak Time 2 Delay 0 Thru 5 [Enter]
Chan 1 Thru 6 At 5 Sneak Time 2 Delay 0 Thru 5 Fan Mirror Out [Enter]
Group 1 At 5 Sneak Time 2 Delay 0 Thru 5 [Enter]
With the Group 1 with 3 subgroups like (3>4) (2 5) (1 6)
The result is the same :
Channel 3 go at 0 sec, Channel 4 at 1 sec, chan 2 at 2 sec, chan 5 at 3, chan 1 at 4 and chan 6 at 5 sec.
Is there an another method or an setup option for Delay command pack the channels whit the offset and don't spread the delay on all channels?
I work on ETCnomad EOS V3.2.6.29
Sorry but English is not my first language I hope it's clear.
JoLuX
