• State Verified Answer
  • Date
    Mirdex
  • Date
  • Replies 4 replies
  • Subscribers 188 subscribers
  • Views 366 views
  • Users 0 members are here

Update Eos Ti 3.1.0 build 288 to 3.2.x, need advice

Hello, I need advice on upgrading my console to the most secure version available today. I read that version 3.2.1 had critical errors. I understand correctly that I can safely update to the latest version 3.2.6 February 26, 2024 and my console will not turn into a brick, right?

I apologize if I wrote it in the wrong place and for the chaotic text.

The console was purchased in 2019 year.



removed P/N and S/N from post
[edited by: eos moderator at 8:27 PM (GMT -5) on Sun, Mar 24 2024]
Parents
  • +1

    Yes, that's correct. You can update any Ti to version 3.2.6 and you can do so directly from version 3.1.

    Just a heads-up: 3.2 has removed the network protocols ETCNet2 (aka EDMX) and Avab/UDP, so of you are relying on these you will have to stay with the latest version of the 3.1 branch.

    3.2 included other changes as well (notably the Protocols section in patch) and moved a lot of settings from the shell into setup. All those changes are explained in the release notes, so make sure to read those thoroughly.

  • 0 in reply to eos moderator

    Thanks for the answer! For the most part I need new fixture libraries, but I don't mind updating the remote to the latest version due to various issues.

    But I still find out whether we use these protocols or not (mainly for synchronizing light and sound)

  • 0 in reply to Mirdex

    The protocols would have been used to control lights. They were an older version of sending DMX-like data through the network. Usually those would be controlling older ETC Net2 gateways or an old ETC CEM dimmer processor.

    Simplest way to find out if your system relies on your protocols is to have a look in the shell with your current version. In the shell go to Settings > Network. If those protocols are checked you need to figure out if they're actually controlling something. If they're not checked, i.e. currently not being sent anyways, you should be safe.

Reply
  • 0 in reply to Mirdex

    The protocols would have been used to control lights. They were an older version of sending DMX-like data through the network. Usually those would be controlling older ETC Net2 gateways or an old ETC CEM dimmer processor.

    Simplest way to find out if your system relies on your protocols is to have a look in the shell with your current version. In the shell go to Settings > Network. If those protocols are checked you need to figure out if they're actually controlling something. If they're not checked, i.e. currently not being sent anyways, you should be safe.

Children
Related

www.etcconnect.com