• State Suggested Answer
  • Date
    kikal
  • Date
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 186 subscribers
  • Views 507 views
  • Users 0 members are here

channel not responding in cue list

Hello Everybody,

i work on EOS TI and today i use a files from an EOS GIO

i have a problem, with a cue list , i can control a device when i am out of the cue list but when i go in the cue list, i lost the channel.

I have  little 0 in red (manual value) in the tombstone of the channel and i can't remove it.

The channel is unpark, is not in fader ...

Thanks in advance and sorry for my english.

Erik

Parents
  • 0

    About is your best friend when investigating stuff like that. The section Current Values will tell you what the source of a channel's parameters are.

    What type of channels do you use? Conventional tungsten lights on a dimmer, LED lights, moving lights? The reason for your symptoms could be that in your cues e.g. a shutter is closed or the color parameters are either full when they should be zero (CMY) or are zero when the should be full (RGB).

Reply
  • 0

    About is your best friend when investigating stuff like that. The section Current Values will tell you what the source of a channel's parameters are.

    What type of channels do you use? Conventional tungsten lights on a dimmer, LED lights, moving lights? The reason for your symptoms could be that in your cues e.g. a shutter is closed or the color parameters are either full when they should be zero (CMY) or are zero when the should be full (RGB).

Children
No Data
Related

www.etcconnect.com