• State Not Answered
  • Date
    tecaj2
  • Date
  • Replies 3 replies
  • Subscribers 185 subscribers
  • Views 439 views
  • Users 0 members are here

Multicell control of Chauvet Maverick Pyxis

  I am having trouble controlling the pixels on a Pyxis. I have it patched as a multicell fixture, the number of addresses needed matches the Chauvet user manual. I can select a cell in EoS software and instruct a color change or a change in intensity. However that instruction does not result in the light doing what I asked. Perhaps there are conflicting instructions coming from ring, beam, background, or main parameters?

Parents
  • 0

    I had a quick look at the Fixture.
    Without ever had used it:
    - i think some Ring/Beam functions are mixed into the Cells, and i would have done it different
    - all parameters are in the Fixture (you need to find them)

    To better understand the Fixture, take yourself the Manual and have a look into Patch<Fixtures

    The outer Ring is, mostly, Cell 1-9. Cell 10 is the Center. That is all like in the Manual.
    Strob, Background color, Color-Mix is sometimes on different Cells.

    Have a look again and try to not select "All" Cells, because that will mess some thinks up a bit ; )

Reply
  • 0

    I had a quick look at the Fixture.
    Without ever had used it:
    - i think some Ring/Beam functions are mixed into the Cells, and i would have done it different
    - all parameters are in the Fixture (you need to find them)

    To better understand the Fixture, take yourself the Manual and have a look into Patch<Fixtures

    The outer Ring is, mostly, Cell 1-9. Cell 10 is the Center. That is all like in the Manual.
    Strob, Background color, Color-Mix is sometimes on different Cells.

    Have a look again and try to not select "All" Cells, because that will mess some thinks up a bit ; )

Children
No Data
Related

www.etcconnect.com