Set Submaster fade time with a macro

Thanks for that answer, but I am not making myself clear.   I wish to set the fade time for the submaster when you push the manual button from a macro.  I can set it to 'Hold' but I can't set the time of the fade into the submaster.    Thank you.

Thanks for that answer, but I am not making myself clear.   I wish to set the fade time for the submaster when you push the manual button from a macro.  I can set it to 'Hold' but I can't set the time of the fade into the submaster.    Thank you.

I'm probably not understanding you either but you can try learning a macro like:

[Sub[ X [Time] 3 [Time] {Manual} [Time] 3 [Enter]

which should save as 

Sub X Up 3 Dwell Manual Down 3 Enter

Thanks for trying to help.  I followed your directions, to no success.  My result was:

Sub X Time 3 Time Manual Time 5 Enter

I'm trying to set the:  Submaster [Tab 15] Up Time and Down Time  amounts.

Thanks,

Please note that the instuctions from sk8rs_dad are for Live-Learning!
If you are not intending to change the Dwell or up-Time you can hit [Time] again to move on to the next value.

Yes, I understood sk8rs_dad  meant live learning.   I have tried this Macro in live learning prior to asking for assistance, and again, several times after seeing these posts.   There is a problem with the live learning.  when I move from the Macro Tab to the Submaster Tab, the Live Learning stops.  Just like hitting the esc key.  I am still unable to set submaster fade times from a macro. 

Not sure why you are moving from the macro tab to the submaster tab. The whole command line should be learned in Live. If you hit Learn in the Macro tab, it starts to edit a macro, not learn a new one.

Ok, I see my error.  I am mistaken. Sorry about that.   I've got it now, and it is all good. Thanks for all the help