RE v1.9 Known Issue RND 0005182 Unplugging and plugging a Gateway causes Eos to lock up

Howdy,

I'll admit this description does sound a bit ominous, so I checked with our developers.

The Eos lockup that is described could only occur if all of these statements were true:  (It might not even if they are, but all of these must be true for it to happen.)

• You are using a gateway running version 2.0.0 or later code
• You have RDM enabled on at least one port of the gateway
• You have an RDM device plugged into the gateway on one of the ports with RDM enabled
• You unplug and replug that gateway within 2 minutes

Howdy,

I'll admit this description does sound a bit ominous, so I checked with our developers.

The Eos lockup that is described could only occur if all of these statements were true:  (It might not even if they are, but all of these must be true for it to happen.)

• You are using a gateway running version 2.0.0 or later code
• You have RDM enabled on at least one port of the gateway
• You have an RDM device plugged into the gateway on one of the ports with RDM enabled
• You unplug and replug that gateway within 2 minutes

Tracy-

Thanks for the clarification- I also thought the description was a bit ominous but since we don't unplug our gateways often, I didn't think much of it.  It is good to know that it is related to using RDM, because we do have RDM-equipped devices.

-Todd