• State Suggested Answer
  • Date
    thestub
  • Date
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 188 subscribers
  • Views 158 views
  • Users 0 members are here

Inhibitve Macro Bug

I created an Inhibit Sub to inhibit haze output.  Great!

Made The dwell time hold.  great!

Press Bump button repeatedly Cycles the Sub on and off, Great!

The virtual slider (Tab 28) does not go up and down on each press  Not so great

On the MobileRFR (ios) the Slider does show correct state  Great

I have not a motorized fader wing to check it there.  I feel like it should show current state on virtual faders  and Motorized

Version 3.2.8.25

EOS Nomad Backup

Ion Primary

Parents
  • 0

    further information. the fader has to be in the Full state for the bump button to cycle on and off  The same is true for the macro i created to trigger the bump button .  if the fader is less than 100 it will go in to Inhibit state but not come out via the bump or macro button press 

    I feel that the sate of the fader should not dictate who the bump button reacts orin this case does nothing

Reply
  • 0

    further information. the fader has to be in the Full state for the bump button to cycle on and off  The same is true for the macro i created to trigger the bump button .  if the fader is less than 100 it will go in to Inhibit state but not come out via the bump or macro button press 

    I feel that the sate of the fader should not dictate who the bump button reacts orin this case does nothing

Children
No Data
Related

www.etcconnect.com