• State Not Answered
  • Date
    hiads
  • Date
  • Replies 10 replies
  • Subscribers 186 subscribers
  • Views 470 views
  • Users 0 members are here

Magic sheet needing double click

I have set up a magic sheet for busking that has buttons on it linking to submasters. In this way I can control for example the colour changes of some S4 PARS but using a fade time, so in the options set to up 3 secs, hold then down 3 secs. Each set of buttons has a BO as well, for colour using inhibit mode, for dimmers recorded at level zero.

It works fine except that after the first use of each button the next time I have to click on the button twice to make it happen. 

The colour changes are left as htp on the submaster options since these always run ltp anyway. Intensity changes via dimmers are set to ltp.

I have tried switching off automark but that made no difference.

Is there any way of getting rid of the double click? Or maybe this is not the best way to do this anyway!

Thanks.

Parents Reply Children
  • 0 in reply to hiads

    Ok, so i still not see the problem here.
    BUT i do have clue what you maybe experiance and i have a offer for you.

    1. i tryed to click wild on you Magic Sheet while checking what is going on in the background
    2. if i have one color up and put in an other color, 2 faders are up and running and than you have to double-tab to get that color back on.

    Offer No1:
    Put an indicator on your Magic Sheet to see what Submaster is up-and-running (not the best solution)

    Offer No2:
    Use the a Setting in Submaster-Blind-Mode on your Subs with the Color --> Stomp: Release (more prefered)
    with this the Intensity ceeps beeing Up and only the Color is changing.

  • 0 in reply to hiads

    And is there a special reason why you would put the Dimmer-Sub 84 not as an inhibitiv?

Related

www.etcconnect.com