Art-net timecode

There is currently no way for Eos to generate timecode (outbound). It will only respond to incoming timecode from either MTC (MIDI) or SMPTE. Depending on the console or hardware you have will determine what additional hardware (if any) would be necessary. More information on timecode on the informative training video from ETC https://www.youtube.com/watch?v=O5nGu1ON_IQ

But in general, someone else usually should be responsible for the master clock for an event. This is usually either video broadcast control room or the musician/music director/conductor. Lighting typically will slave behind the master clock which is triggered by someone else. 

There is currently no way for Eos to generate timecode (outbound). It will only respond to incoming timecode from either MTC (MIDI) or SMPTE. Depending on the console or hardware you have will determine what additional hardware (if any) would be necessary. More information on timecode on the informative training video from ETC https://www.youtube.com/watch?v=O5nGu1ON_IQ

But in general, someone else usually should be responsible for the master clock for an event. This is usually either video broadcast control room or the musician/music director/conductor. Lighting typically will slave behind the master clock which is triggered by someone else. 

Can Eos receive timecode over Art-Net?

No, Eos doesn't receive timecode over ArtNet.