Nomad Client Not Connecting to Master

What is network address of both devices including all three parts 1.) IP address 2.) Subnet Mask 3.) Default Gateway

Screenshots would be helpful

An example of a working setup - with both Nomad Laptops being connected via an
unmanaged Switch (not crossover cable) would have following network addresses:
Nomad 1 IP: 10.101.1.101
Subnet Mask: 255.255.0.0
Default Gateway: 10.101.1.1

Nomad 2 IP: 10.101.1.102
Subnet Mask: 255.255.0.0
Default Gateway: 10.101.1.1

If you are going through a or multiple managed switches, then there can be many

settings that allow you to see each other, but not connect. That's why we recommend

using an unmanaged switch to troubleshoot, and if it works then, you will need to figure

out which of your managed switch settings needs to be adjusted.

Realize that using Nomad on your own computers, in Eos Setup, you can only see the Network Address Setup,
but cannot edit it there - you must edit that information in the Mac OS Settings.

Send screenshots from Network Settings of both Nomad Laptops so we can further troubleshoot,
or feedback if you got it working, what was the solution would be nice.

Have fun!

An example of a working setup - with both Nomad Laptops being connected via an
unmanaged Switch (not crossover cable) would have following network addresses:
Nomad 1 IP: 10.101.1.101
Subnet Mask: 255.255.0.0
Default Gateway: 10.101.1.1

Nomad 2 IP: 10.101.1.102
Subnet Mask: 255.255.0.0
Default Gateway: 10.101.1.1

If you are going through a or multiple managed switches, then there can be many

settings that allow you to see each other, but not connect. That's why we recommend

using an unmanaged switch to troubleshoot, and if it works then, you will need to figure

out which of your managed switch settings needs to be adjusted.

Realize that using Nomad on your own computers, in Eos Setup, you can only see the Network Address Setup,
but cannot edit it there - you must edit that information in the Mac OS Settings.

Send screenshots from Network Settings of both Nomad Laptops so we can further troubleshoot,
or feedback if you got it working, what was the solution would be nice.

Have fun!

I will be at the theater this evening and will check all of the information you suggested. Thank you so much for your help.

Thanks,

Bruce

I'm not sure what changed, but when I connected the next time I was in the theater, it worked. The only thing that I can think of was that I was unable to restart the primary computer on the initial day of the problem, since it was running the show. I had restarted my client computer and that didn't make a difference.

Thank you for your willingness to provide help! It is greatly appreciated. 
Thanks,

Bruce