Effect does not use part timing

Question

Example: Simple Color Fx with in and out timing set to Cue/Sub. Cue 1: Color effect running on some fixtures Cue 2: Part 1: (Time 12s)Something else happens Cue 2: Part 2: (Time 1s) FX Stops and fixtures fade to a static color. 
 I expect the lights to fade to their static color in 1 second. 
 But the Stop Effect, although its written in part 2, seems to use the timing of Part 1. 
 Tested on EOS TI and Nomad. Version 3.2.9 Build 16

eos moderator · Accepted Answer

You're right, I was looking at it in spreadsheet format. 
 What you're seeing in summary view is indeed already written up as display bug: 
 [EOS-54741] Blind Tombstone font color for effect is incorrect in part cues 
 I will add a note that you came across this as well.

eos moderator · Answer

Thank you for reaching out. I can't reproduce this. Would you mind sending us a showfile to eos(dot)moderator(at)etcconnect(dot)com? Please indicate in the email which channels, cues and effects are affected.

eos moderator · Answer

Thank you for the email and the instructions. 
 Part 1 has the FX stop, part 2 the color palette. The result looks correct to me. 
 I went ahead and moved the FX stop to part 2 and the color palette in part 1. The result seems to reflect the changes. 
 The one thing that tripped me up at first was that non-FX color changes seemed to be following the time of the FX stop. This only happened because the color values of cue 1 and 2 were the same. 
 Long story short: I'm not seeing what you describe. Would you mind re-checking the showfile?

Effect does not use part timing

Top Replies