EOS to trigger Resolume

First issue: you want to have different parts for Tx and Rx.

Also, did you enter a OSC UDP Tx IP Address?

Some Examples of what I'm doing 

The windows IPv4 settings are from the computer running Nomad? And you're sending to the computer with the settings in the screenshot below (mint colored OSC Preferences title across the top)?

Summary:

• Nomad:
  IP 10.101.1.1
  subnet mask 255.255.0.0
  sending to 10.101.1.2
  Rx 7000
  Tx 7001
• Resolume:
  IP 10.101.1.1
  subnet mask unknown
  sending to 10.101.1.2
  Rx 7000
  Tx 7001

If that summary is correct, your problems are as follows:

1. you have two computers with the same IP address (unless you run Nomad and Resolume on the same computer)
2. you're sending not to the other program's IP address
3. the Rx port of one application needs to match the Tx port of the other application.

The windows IPv4 settings are from the computer running Nomad? And you're sending to the computer with the settings in the screenshot below (mint colored OSC Preferences title across the top)?

Summary:

• Nomad:
  IP 10.101.1.1
  subnet mask 255.255.0.0
  sending to 10.101.1.2
  Rx 7000
  Tx 7001
• Resolume:
  IP 10.101.1.1
  subnet mask unknown
  sending to 10.101.1.2
  Rx 7000
  Tx 7001

If that summary is correct, your problems are as follows:

1. you have two computers with the same IP address (unless you run Nomad and Resolume on the same computer)
2. you're sending not to the other program's IP address
3. the Rx port of one application needs to match the Tx port of the other application.

Hi just wanted to follow up with response to this . I got It working after. My was issue within Resolume the Syntex wasn't correct 

Thank you for letting us know!