Two ETCnomad Dongles and one PC

You should upgrade your existing dongle to 6k.

Hi sstaub, thanks for your answer. But it doesn't answer my question yet. I would only buy a second one because sometimes I need redundancy. So I wouldn't just upgrade the existing one. But if I don't need redundancy but want my rack to be able to output more than two universes, do I need to disassemble the rack to unplug the old one just to have more channels licensed? Regards

Eos only supports a single dongle connection. Technically it connects to the "first one it sees" - which depends on how the OS found the dongles and may not be consistent from boot to boot.

We don't have any features or support for multiple dongle stacking or choice of dongle. 

 fohlwilting Hi Lars,  when plugged into the same computer or console and plugged in before starting up eos, they will add. So 6144 and a 1024 plugged into the same device will give 7168 usable parameters. Ive done it before.

Hope this helps

This is incorrect. Dongle licenses don't add 

Ok thank you. Good to know.

Ok. Funny to see different answers :) I still have to consider it, but if I buy a 6K dongle, I will report back.

Maybe it is because I use a 4k gio and plugged a old 8k eos classic key into it.

Did you ended with 8 or 12k output???