I'm new to Eos and I'm trying to make an aurora borealis effect with 5 spectracyc 200 rgbw 608s and all of the forums/guides haven't been helpful so far. How do i go about making this effect?
I'm new to Eos and I'm trying to make an aurora borealis effect with 5 spectracyc 200 rgbw 608s and all of the forums/guides haven't been helpful so far. How do i go about making this effect?
For the general understanding of pixelmapping you can find some videos here: https://www.etcconnect.com/Support/Tutorials/Expert-Topics/Virtual-Media-Server.aspx
This is what i did for a quick mock-up, assuming those 5 fixtures are channel 1 to 5:
Tab 9:
In Live set your fixtures at full with RGB all at full.
I set the server channel at full (Chan 10 in my case), Crossfade at -100 (that's its minimum):
And set the following values for the effect layer (Chan 11 in my case):
Intens At Full
Intens_3 At 50
Start color: choose something green/cyan
End color: chose something blue/cyan
Playback_Speed 20
File Input_File_Select_1
Width 5
Height 1
Tab 10 shows you a preview, this is what i get:
I hope this helps!
For the general understanding of pixelmapping you can find some videos here: https://www.etcconnect.com/Support/Tutorials/Expert-Topics/Virtual-Media-Server.aspx
This is what i did for a quick mock-up, assuming those 5 fixtures are channel 1 to 5:
Tab 9:
In Live set your fixtures at full with RGB all at full.
I set the server channel at full (Chan 10 in my case), Crossfade at -100 (that's its minimum):
And set the following values for the effect layer (Chan 11 in my case):
Intens At Full
Intens_3 At 50
Start color: choose something green/cyan
End color: chose something blue/cyan
Playback_Speed 20
File Input_File_Select_1
Width 5
Height 1
Tab 10 shows you a preview, this is what i get:
I hope this helps!