• State Suggested Answer
  • +1 person also asked this people also asked this
  • Date
    nvhs
  • Date
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 188 subscribers
  • Views 453 views
  • Users 0 members are here

Submasters Coming On Randomly - Not responding to faders.

I'm using the Ion XE and have run into an issue where, seemingly at random, a set of submasters go to 65% or 18% and stop responding to faders. No commands are entered prior to this happening, no cues are running, and it can only be fixed by turning the board off and on again. Any thoughts as to what's causing this, or how to stop it from happening?

Parents
  • 0

    I have also had an issue like this. We have our house lights on a fader and randomly when we take that fader down for the show the one next to it will be set to full, which is a full system stage wash with no control over that fader. We can use inhibitors to change the intensity but the values will always go to full. It is a newer XE 20 with an attached fader wing. The house fader and the full stage wash are on the built in faders. The only way to reset it for us is to off and on again too. The work around we are doing right now is putting the house fader way off to the side of the attached wing, alone with nothing around it. So far so good with that. 

    If this happens again I will follow the steps and hope that it can help resolve this. 

Reply
  • 0

    I have also had an issue like this. We have our house lights on a fader and randomly when we take that fader down for the show the one next to it will be set to full, which is a full system stage wash with no control over that fader. We can use inhibitors to change the intensity but the values will always go to full. It is a newer XE 20 with an attached fader wing. The house fader and the full stage wash are on the built in faders. The only way to reset it for us is to off and on again too. The work around we are doing right now is putting the house fader way off to the side of the attached wing, alone with nothing around it. So far so good with that. 

    If this happens again I will follow the steps and hope that it can help resolve this. 

Children
No Data
Related

www.etcconnect.com