Prevent recording DMX winch moves in lighting cue list (and vice versa)

Please remember that DMX protocol doesn't have any error correction or check sums, controlling winches by DMX can lead to dangerous situations.

To exclude channels from being recorded into a cuelist you can apply a channel filter or a partition to this cuelist.

If you speak about an partition, you mean a 'regular' partition for the channel?
Or is there an other way to partition a Cuelist by its own.

And the downside of the partition is, that (as far as i know) you are currently still able to move one selected channel from an other partition.
Or has that changed?

Regular partition, but not assigned to the user as you would classically do. Assign it to the cuelist (Cue 1/ Partition 10 Enter).

This does the same thing as assigning a filter to a cuelist, the advantage is that the partition is an object that can be managed more easily than the filter.

That you can control a channel outside of your partition is still true if you have a partition for your user, but if you have the partition on your cuelist there are no exceptions in that cuelist.

Regular partition, but not assigned to the user as you would classically do. Assign it to the cuelist (Cue 1/ Partition 10 Enter).

This does the same thing as assigning a filter to a cuelist, the advantage is that the partition is an object that can be managed more easily than the filter.

That you can control a channel outside of your partition is still true if you have a partition for your user, but if you have the partition on your cuelist there are no exceptions in that cuelist.