• State Suggested Answer
  • +2 person also asked this people also asked this
  • Date
    maartenhietbrink
  • Date
  • Replies 9 replies
  • Answers 1 answer
  • Subscribers 193 subscribers
  • Views 2071 views
  • Users 0 members are here

que stays at 0.0 sec

hi all, 

Im having an issue with some ques in my quelist staying at 0.0 seconds after a go. 

They make al the changes they need to make butt stay red and the time remaining stays at 0.0. 

If i give them a go to que (or i do a go to any other que) it disepears and they become yellow again. 

Its not effecting the show at all butt im just wondering what it can be. 

greetings Maarten 

Parents Reply Children
  • 0 in reply to jolson

    Cannot upload a screenshot anymore: I followed woopi method and this weird behaviour disappeared. Solved

  • 0 in reply to jolson

    I’m on tour and after arriving at the next location, it was fixed as well, maybe turning it off and on again worked (and I mean also turning off the power button, not just closing down the software and). So I can’t make a screenshot right now. It only seemed to occur after cloning a fixture (copy only show). 

    It works as a normal running cue, it turns red, counts down the timing and gives a percentage. But when it arrives at the end of cue (time at zero, percentage at 100%), it stays red. Also, Hang cue won’t go. 

  • 0 in reply to woopi

    Yesterday night a had the same thing happening. many cues stopped at 0 seconds and still beeing red.

    This was an a @5 first Gen. running 3.3.4.21

    And yes i copied (in patch "copy to plus show ") a lot channels araound in that show.

    Even a "gotocue enter" couldn't complete that fade. 

    I had also several cues in red at 0sec at the same time.

    A stop/back didn't work as expected as a fade was still going on, it stopped that fade instead of going back on the current finished cue.

    can't reproduce this with the same showfile on my mac.

Related

www.etcconnect.com