Multi console power on

Here's what it says in the v1.9 supplement:

Remote Power On/Off

In a multi-console system, it is possible to power on and off devices remotely. Remote Power On and Remote Power Off must be enabled on each device before it can receive the power on and off commands. In the ECU go to Settings>Network>Enable Remote Power Off and Enable Remote Power On. The default setting for both is “Disabled”.

Note:

Remote Power On is only available for RVIs and RPUs, not on Eos, Ion, or Element. Remote Power Off will work for RVIs, RPUs, Eos, Ion, and Element.

The Remote Power commands are sent from the browser. The command for Power On is sent from Browser>Network>Power On MultiConsole System, and the command for Power Off is from Browser>Network>Power Off MultiConsole System.

Note:

Only devices that synchronize with the Primary will be available for Remote Power On and Off.

Here's what it says in the v1.9 supplement:

Remote Power On/Off

In a multi-console system, it is possible to power on and off devices remotely. Remote Power On and Remote Power Off must be enabled on each device before it can receive the power on and off commands. In the ECU go to Settings>Network>Enable Remote Power Off and Enable Remote Power On. The default setting for both is “Disabled”.

Note:

Remote Power On is only available for RVIs and RPUs, not on Eos, Ion, or Element. Remote Power Off will work for RVIs, RPUs, Eos, Ion, and Element.

The Remote Power commands are sent from the browser. The command for Power On is sent from Browser>Network>Power On MultiConsole System, and the command for Power Off is from Browser>Network>Power Off MultiConsole System.

Note:

Only devices that synchronize with the Primary will be available for Remote Power On and Off.

Thanks for your replies, should've read the manual, as always. Cheers.