• Date
    travisres
  • Date
  • Replies 2 replies
  • Subscribers 184 subscribers
  • Views 1959 views
  • Users 0 members are here

iRFR Preview Cue Times

Hope this isn't written up anywhere else. I didn't see it.

It looks like in the iRFR Preview app, the cue time listed to the right is actually the duration time of the cue.

I'm in a setup where the Ion is triggering the moving light desk (MA). We have a bunch of dummy cues in the Ion where nothing is happening in the Ion. The Preview App shows the cue time as - since the duration of the cue is 0, even though the time is set to something else. I could go through and put in a dummy channel in all of the cues so that it displays a real time, but then I can't quickly tell if the cue does anything in the Ion.

Is there any way to change to to the actual cue time(intensity)? I know that this opens up a can or worms as then the question is "is it the intensity time for the whole cue, or Part 1 if there are Parts. Or if its only a color cue, where does the time come from, etc etc.... 

Anyone else run in to this or am I missing a setting somewhere.

Thanks,

Parents

  • Benjamin-

    I assume you're wanting to see the a cue time count down on the iRFR and you've set the Ion cue to the same timing as the MA cue.

    If the dummy cues on the Ion don't have move instructions, then the duration is 0 (or undefined), as there's nothing happening in the cue.  The cue time only comes into play when there is a move instruction recorded into the cue.

    If you need to see the time count down on the iRFR, you'll need to have a dummy channel with a move instruction (level change) recorded in the dummy cues.  You would probably want to also label the cues that are only dummy triggers and don't do anything on the Ion.

    As far as I know, there's currently no way to force the Ion to count down or display a time for a cue that doesn't include a move instruction.

    -Todd

     

    Edit: Anne replies with better info while I'm typing -



    [edited by: tdrga at 11:53 AM (GMT -6) on Tue, Feb 8 2011]
Reply

  • Benjamin-

    I assume you're wanting to see the a cue time count down on the iRFR and you've set the Ion cue to the same timing as the MA cue.

    If the dummy cues on the Ion don't have move instructions, then the duration is 0 (or undefined), as there's nothing happening in the cue.  The cue time only comes into play when there is a move instruction recorded into the cue.

    If you need to see the time count down on the iRFR, you'll need to have a dummy channel with a move instruction (level change) recorded in the dummy cues.  You would probably want to also label the cues that are only dummy triggers and don't do anything on the Ion.

    As far as I know, there's currently no way to force the Ion to count down or display a time for a cue that doesn't include a move instruction.

    -Todd

     

    Edit: Anne replies with better info while I'm typing -



    [edited by: tdrga at 11:53 AM (GMT -6) on Tue, Feb 8 2011]
Children
No Data
Related

www.etcconnect.com