I just got a USB X-keys stick for use with my ION console. I have programmed it in hardware mode to trigger a series of macros on the console. Button 1 = Macro 1, Button 2 = Macro 2, etc.
It works correctly when I plug it into the console while the console is on.
here is the problem:
If the x keys is plugged into the console when the console is booting it will not boot up.
The screen shows a big ETC logo and a "Press F2 for BIOS" message
When I unplug the x-keys stick the console continues with the boot process and finally starts.
There was nothing pressing any of the keys on the x-keys or the keyboard.
Thanks
M Weeks
