MSC over network with Ion?

I was wondering if there is a way to use Midi Show Control with the Ion besides directly plugging in a midi cable. Can an MSC source on the same network be selected? Thanks in advance

Parents

0 sk8rs_dad over 14 years ago

AFAIK, MSC has to come in via the MIDI port so no joy for an ethernet solution. I am sure somebody from ETC will be along to correct me if I am wrong.

Ion CAN accept UDP strings although the manual is sketchy on examples of what constitutes a legitimate string that will be acted upon. Setting up a proxy service to convert MSC to UDP would not take much effort, assuming the MSC sender is capable of sending its output over ethernet. I've not seen any software that can do this though so if you know of a package, please let us know what it is.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 travisres over 14 years ago in reply to sk8rs_dad
Its another purchase, but there is the ETC Show Control gateway.

http://www.etcconnect.com/product.overview.aspx?ID=20365

To copy from the website.

Receive MIDI Timecode via ACN

Receive SMPTE Timecode via ACN

MIDI In/Out/Thru ports on rear of unit

SMPTE In port (3-pin Female XLR) on rear of unit

10/100 RJ-45 Ethernet port (auto-sensing & auto-negotiating) on front of unit

Power supplied by PoE (Power over Ethernet) via RJ-45

Optional Power supply for non-PoE systems sold separately via external DC power supply
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Hans.Hinrichsen over 14 years ago in reply to travisres

Just to add a definitive answer here, as Benjamin posted the link to the product page, -- yes, the Ion supports MSC input via an ETC Net3 Show Control Gateway, as well as locally on the console. MTC and SMPTE are also supported input via the Show Control Gateway.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 rjoyner over 14 years ago in reply to Hans.Hinrichsen

Thanks everybody, I think this clears the matter up nicely. I have also put in an inquiry to see what UDP strings/commands are available for the Ion. Unless of course someone perusing this forum can give me an answer first...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 luke.delwiche over 14 years ago in reply to rjoyner

Hi, look in the manual for serial strings - that's the best list for the commands. The supplement discusses how to send them via the network.

http://www.etcconnect.com/docs/docs_downloads/manuals/Eos_v1.7_Operations_Manual_RevA.pdf

http://www.etcconnect.com/docs/docs_downloads/manuals/Eos_Family_v1.9.5_Operations_Manual_Supplement_revA.pdf

-luke-
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Hans.Hinrichsen over 14 years ago in reply to luke.delwiche

Also, the wiki page can be a helpful quick reference: KnowledgeBase: Eos/Ion Serial Command Syntax
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel