• Date
    Pat Immel
  • Date
  • Replies 4 replies
  • Subscribers 184 subscribers
  • Views 2528 views
  • Users 0 members are here

More RevEAL questions

Ok, so I have determined that the EOS has ReVEAL personalities, but the question is now, which one to use.  There are 8 "modes" and three algorithms for each mode plus plus a few have either "Refresh ON" or "Refresh OFF".

I've tried many of the combinations and while technically they function ie, they can be faded up and down and I can change color, I cannot get the fixtures to match the color or gel picker.  I pick a blue on the picker and pink comes out of the fixture.  Also, I cannot get white!

So the bottom line is if anybody has a working personality combination, I'd be all ears!

 

thanks,

 

Parents

  • Pat-

    Having used these fixtures many times on both Eos and Ion, I will tell you that are a few variables that go into answering your question. I see that you are on 1.9.6 for Eos, but what version of ReVEAL are you using?

    If you would let me know the answer to that question, I should be able to get you situated.

    I'll look for your response.

    -Vince

  • in reply to Vince Ferraro

    Thanks Vince and bosox!

     

    As I think I mentioned, these are my first LEDs!  I thought these would be like my movers, that when they were patched into the console with the correct personality they would just work.  I learned that I also needed to set the mode and algorithm on the fixture as well as choosing the correct personality.  Once I got this, the fixtures worked and responded just fine!

     

    Thanks again,

     

     

Reply
  • in reply to Vince Ferraro

    Thanks Vince and bosox!

     

    As I think I mentioned, these are my first LEDs!  I thought these would be like my movers, that when they were patched into the console with the correct personality they would just work.  I learned that I also needed to set the mode and algorithm on the fixture as well as choosing the correct personality.  Once I got this, the fixtures worked and responded just fine!

     

    Thanks again,

     

     

Children
  • in reply to Pat Immel

    Pat-

    Glad to hear that the units are working for you. Just as a heads-up: the profiles for ReVEAL Mode 8 all algorithims in the console are incorrect- the green channel and the amber channel are switched, so the fixture will not respond correctly to the console. I built my own profile for the units as I like to run them in Mode 8- ymmv.

    I'll check back to see if you have any further questions. Have fun!

    Vince

Related

www.etcconnect.com