It sounds like you're wanting to record palettes as "By Type"- this is a softkey option that is available when recording palettes.
From the Eos_Family_v1.9.5_Operations_Manual_Supplement_revA.pdf :
{By Type} Palettes By Type palettes are created with 'default' channels which contain values that can be assigned to any other channel within the same fixture type. By Type palettes can also contain discrete channel values. By Type palettes will display a ‘T' in the lower corner of the direct selects. A ‘+' will display after the ‘T' if there are channels stored with discrete data.
Storing a By Type Palette If {By Type} is used when recording, the lowest number channel of each fixture type will be the default channel. Generally, when storing by type palettes, you will want only one channel of each fixture type in use. Any additional channels in that fixture type will be recorded with discrete data.
It sounds like you're wanting to record palettes as "By Type"- this is a softkey option that is available when recording palettes.
From the Eos_Family_v1.9.5_Operations_Manual_Supplement_revA.pdf :
{By Type} Palettes By Type palettes are created with 'default' channels which contain values that can be assigned to any other channel within the same fixture type. By Type palettes can also contain discrete channel values. By Type palettes will display a ‘T' in the lower corner of the direct selects. A ‘+' will display after the ‘T' if there are channels stored with discrete data.
Storing a By Type Palette If {By Type} is used when recording, the lowest number channel of each fixture type will be the default channel. Generally, when storing by type palettes, you will want only one channel of each fixture type in use. Any additional channels in that fixture type will be recorded with discrete data.
