• State Not Answered
  • Date
    martinsa
  • Date
  • Replies 4 replies
  • Subscribers 185 subscribers
  • Views 5168 views
  • Users 0 members are here

Problems with Manual Master Cue Lists

I had a show last week where I was using multiple playbacks and manual master cue lists.  I liked it very well, but I had an issue trying to use the faders manually.  The Operations Manual Supplement says "With a cue list on a fader set to manual master, a cue will fire in manual time when the fader is moved from 0% or from Full."

It did but not always on the 1st time I threw the fader.  Sometimes it took 1 extra time, sometimes 2 extra full throws of the fader.  This was bouncing between multiple cue lists controlling the same parameters (i.e. each list would have a single looping cue moving my lights to a specific location).

Steve Martin, Indianapolis Symphony

Parents
  • 0

    Steve, you will find that the faders want to be set to zero (rather than full) the first time you start using this feature.  Please try that and let us know if you still see an issue.

    Thanks!!

    a

     

  • 0 in reply to Anne Valentino

    I don't think this is an acceptable solution.

    First off, it doesn't actually work.  I've had the fader at zero and had to throw it to full and back before it responded.  Secondly, I really want to it to start fading immediately when it goes off full or zero (like the documentation says).  If I'm busking a show, I'm really busy doing lots of stuff live.  I don't want to have to think about whether or not the fader is going respond to the slow manual fade I'm trying do.  Not to mention that if it doesn't respond, I've missed my "moment" to do the fade.

    In my situation, I'm bouncing between different playbacks controlling the same parameters and I'm using a combination of the faders for manual fades and the buttons to trigger "go" commands on the cuelists.

    -Steve

Reply
  • 0 in reply to Anne Valentino

    I don't think this is an acceptable solution.

    First off, it doesn't actually work.  I've had the fader at zero and had to throw it to full and back before it responded.  Secondly, I really want to it to start fading immediately when it goes off full or zero (like the documentation says).  If I'm busking a show, I'm really busy doing lots of stuff live.  I don't want to have to think about whether or not the fader is going respond to the slow manual fade I'm trying do.  Not to mention that if it doesn't respond, I've missed my "moment" to do the fade.

    In my situation, I'm bouncing between different playbacks controlling the same parameters and I'm using a combination of the faders for manual fades and the buttons to trigger "go" commands on the cuelists.

    -Steve

Children
Related

www.etcconnect.com