• Date
    techtech
  • Date
  • Replies 3 replies
  • Subscribers 184 subscribers
  • Views 8010 views
  • Users 0 members are here

Ion - output on artnet

Hi

I'm in hurry so sorry if this sounds a stupid question.  Does the ion output artnet via the either net port on the back.  I'm about to put an ion into a venue and I need to output universe 1 and 2 via artnet to talk to thier dimmers (U1) and some my movers and other DMX controlled devices via universe 2.  Is this possible?  I've only ever used the eos family to talk to other ETC networked devices (net3 DMX gateways and sensor dimmers ect..).

I have not even tried yet but I'm on a tight schedule and will be trying it early afternoon.  I know nothing about artnet.

Thank you advance

TT

Parents

  • There is only one Ethernet port on the back of the Ion, and yes, it outputs all protocols. You have to enable Art-Net in the Settings option in the shell, probably best to not make it default (default means that it will be output for everything that is patched, not a good idea with Art-Net).

    Remember that Art-Net universe 0 is patched as 1 in Ion, 1 as 2, and so on.

    Give support a call if you're stuck-

    -luke-

Reply

  • There is only one Ethernet port on the back of the Ion, and yes, it outputs all protocols. You have to enable Art-Net in the Settings option in the shell, probably best to not make it default (default means that it will be output for everything that is patched, not a good idea with Art-Net).

    Remember that Art-Net universe 0 is patched as 1 in Ion, 1 as 2, and so on.

    Give support a call if you're stuck-

    -luke-

Children
No Data
Related

www.etcconnect.com