• Date
    David
  • Date
  • Replies 2 replies
  • Subscribers 182 subscribers
  • Views 3517 views
  • Users 0 members are here

Random Cue on Console Boot

Wondering if anyone else has experienced:

 When my console boots, it bumps to a cue....

Prior to shutting off the board, I type Go to Cue 0 * then Go to Cue OUT *.

As soon as my console finishes booting it bumps into a look.

The display has channels in Magenta, in what looks like a cue.  The cue status does not show that the console is actually in a cue, and when I hit go the cuelist advances to cue one.

 

Thanks

Parents

  • David, we were dealing with the same thing during our first week of shows with the console.  We happened to have Anne and Dennis there and they suggested a Deep Clear.  Once we did that, the "random tracked levels that looked like a cue, but we weren't in a cue" went away.

    You do a deep clear in the maintenance menu of the shell program.  Make sure you save before you do it.  You should be fine!

    Stu 

     

Reply

  • David, we were dealing with the same thing during our first week of shows with the console.  We happened to have Anne and Dennis there and they suggested a Deep Clear.  Once we did that, the "random tracked levels that looked like a cue, but we weren't in a cue" went away.

    You do a deep clear in the maintenance menu of the shell program.  Make sure you save before you do it.  You should be fine!

    Stu 

     

Children
No Data
Related

www.etcconnect.com