• Date
    Lukas
  • Date
  • Replies 3 replies
  • Subscribers 184 subscribers
  • Views 2957 views
  • Users 0 members are here

Sneaking threw pallets/Manual Cue fade

Hi everybody

some Problems came up, heading a live show on Saturday.

Wrote some litte cuelists and now i want to step threw the cues with the faders. I read the manual but didn't have any sucess.

The next thing is. I got some focus pallets. Now i want my MLs to sneak in X-time from Pallet1 to Pallet 2.

Console is an eos

How to do this?

thanks

Lukas

Parents

  • Did you manage to load your cuelists onto your Faders?

    I believe the syntax is:

    [Cue][x]/[Enter][Load} - Then press the two buttons together underneath the fader you would like to assign the cue list to.

    You can also assign cue lists by going into Displays-Setup-Fader Config, and assigning the fader to a playlist.

    Once you've done that you will be able to press the bottom button of the two below the fader. This will act as a Go button and the top one as your Stop/Back.

Reply

  • Did you manage to load your cuelists onto your Faders?

    I believe the syntax is:

    [Cue][x]/[Enter][Load} - Then press the two buttons together underneath the fader you would like to assign the cue list to.

    You can also assign cue lists by going into Displays-Setup-Fader Config, and assigning the fader to a playlist.

    Once you've done that you will be able to press the bottom button of the two below the fader. This will act as a Go button and the top one as your Stop/Back.

Children
Related

www.etcconnect.com