How do I replace a channel

Question

Hello. Question. Say I have channel 92 @ all different intensity in cue 1 thru 80. And thats a bad dimmer so I replaced it with channel 100. Is there a way I could go into blind and select those cues and somehow replace channel 92 with channel 100 without going cue by cue and keep recored intensity? Ive done this on other boards but can figure this out. The {replace with} soft key is not doing it. 
 Thanks 
 Chris

dsmurfin · Accepted Answer

Hi Chris, 
 You can move a channel in patch using Channel X [Copy To] [Copy To] Channel X which will move all it's attributes over, but in this instance I'm guessing you want to keep your channel number as is. 
 Go into Blind and enter [Cue] [1] [Thru] [80] [Enter], this will select all the cues in your show. 
 Then enter [92] [Copy To] [100] [Enter]. This will copy the values from 92 to 100 for your whole cue list. 
 Then enter [92] [At] [Enter] to clear the values from channel 92 for your entire show. This step is not essential is you want to keep your existing channel info, say because you've already unpatched it and want to repatch when you've fixed it. 
 Hope that helps. 
 Cheers 
 Dan