Change Master Cue List on Ion

It should be [cue][n][/][enter] (where n is the cue list number), then press[load]and possibly [enter]. I'm not at a console and I tried offline on my mac, but it was a little funky with using the hotkeys.

It should be [cue][n][/][enter] (where n is the cue list number), then press[load]and possibly [enter]. I'm not at a console and I tried offline on my mac, but it was a little funky with using the hotkeys.

Yes, very close bosox242,

To the OP, Let's say your sitting in cue list 1 cue 1 and want to go to cue list 2 cue 1.

(This would be 1/1 going to 2/1.)

Press: [cue] [2/] [enter] [load]

It is then loaded on the master fader hit go & you'll go to cue list 2 cue 1. 

If you want to select a cue deeper in the cue list, like say, cue 3,

Press: [cue] [2/3] [enter] [load]

GO will put you in cue list 2 cue 3.

Also a worth while bit of information is, if you have a fader wing -  if you map one of the faders to playback 0 it will work as what ever you have loaded on your master. You can change the cues on your master playback and it will change on your fader wing.