• Date
    MarkLNeumann
  • Date
  • Replies 3 replies
  • Subscribers 184 subscribers
  • Views 2316 views
  • Users 0 members are here

Eos/Ion to Insight

Hello All,

I am looking to transfer a showfile from EOS/ION into Insight world.  I know I have to export the ascii file and understand that multi parameter fixtures will not transfer.  For the most part I am ok with this as we are not bringing any of our moving lights along with us.

However, I would like to try to preserve my LEDs.  In my file I have 6 RGB LEDs patched in channel 201 thru 206.  I was thinking I could try to preserve the data in them by splitting them up and making channels 301 thru 306 red, 311 thru 316 green, and 321 thru 326 blue.

However when I go into blind to copy the data I have no luck.  My thoughts were: Cue 1 thru 356 chan 201 thru 206 red copy to 301 thru 306.  Alas, no luck.

Can anyone lend insight on copying parameter data into intensity data?

Parents

  • Hi Mark,

    Just tack on "Intensity" to your last channel range. You need to  be specific that you want the value of parameter RED to copy to a value of parameter INTENSITY. Otherwise it assumes that you want try to copy Red to Red, and since a dimmer doesn't have RED, it just ignores it. 

    [Cue] <1> [thru] [Enter]

    <201> [thru] <206> {RED} [Copy To] <301> [thru] <306> {Intensity} [Enter]

Reply

  • Hi Mark,

    Just tack on "Intensity" to your last channel range. You need to  be specific that you want the value of parameter RED to copy to a value of parameter INTENSITY. Otherwise it assumes that you want try to copy Red to Red, and since a dimmer doesn't have RED, it just ignores it. 

    [Cue] <1> [thru] [Enter]

    <201> [thru] <206> {RED} [Copy To] <301> [thru] <306> {Intensity} [Enter]

Children
Related

www.etcconnect.com