DL3 v2.0 Control MSpeed Display Bug

That column is automatically hidden unless you want to it display.  Press and hold {Params} and click on {Position Mspeed} to display it.

yea... that's what i thought too, but its silver (displayed) in my CIA, and when i try to toggle it (ion, so data + select with mouse/touch screen in CIA), all i get is a the button toggling in CIA, and not displaying/not displaying in my live table.

pan/tilt other parameters toggle fine.

M speed shows up fine (and toggles correctly) with my VL2500

sorry if there wasn't enough info in the first post.

thank you!

I am not seeing that behavior on my Ion or Eos.  What software version are you running?

the january 1.9.9 release.

relates to ETC tech case 300215600:

we've had lots of issues including, but not limited to shift/time not displaying the same values between different users; values showing up as "disabled" in about/patch; some other good stuff too.

I read thru the issues that you have called in about.  Could you send me your show file?  Email is: eos (at) etcconnect (dot) com.  Please put Attn: Steven Peterson and reference this forum.

A couple more questions too:
- What software version did you create the show in?
- Have you saved the show, then deep cleared the console, and reloaded the show file to see if this behavior continues?

I read thru the issues that you have called in about.  Could you send me your show file?  Email is: eos (at) etcconnect (dot) com.  Please put Attn: Steven Peterson and reference this forum.

A couple more questions too:
- What software version did you create the show in?
- Have you saved the show, then deep cleared the console, and reloaded the show file to see if this behavior continues?