Stop an effect on 1 parameter

Not sure which console you are using but here's how I believe I am doing it on the ION:

[Fader Controls] {Stop Effect} 1 Enter

You can view running effects with [Browser] {Effect Status} and that is where you can control rate, size, etc of certain effects running by clicking on that particular effect.

If you want to stop all effects at the same time [Fader Controls] {Stop Effect} Enter

I'm sure there are other ways as well.

Jeff Toussieng said:

[Fader Controls] {Stop Effect} 1 Enter

Jeff this would stop Effect 1 running on all the channels not just channel 1!

To stop the effect just on channel 1 you need to place [Channel 1] {Intensity} before the stop effect command.

I thought you could say [1] [Stop Effect] [1] [Enter] but when trying to enter the seconded 1 it throws up an error, so you just say [1] {Intensity} [Stop Effect] [Enter].

Ben's method works fine and is maybe quicker.

Jeff Toussieng said:

[Fader Controls] {Stop Effect} 1 Enter

Jeff this would stop Effect 1 running on all the channels not just channel 1!

To stop the effect just on channel 1 you need to place [Channel 1] {Intensity} before the stop effect command.

I thought you could say [1] [Stop Effect] [1] [Enter] but when trying to enter the seconded 1 it throws up an error, so you just say [1] {Intensity} [Stop Effect] [Enter].

Ben's method works fine and is maybe quicker.