• Date
    SBC
  • Date
  • Replies 6 replies
  • Subscribers 185 subscribers
  • Views 6153 views
  • Users 0 members are here

BUSKING WITH SUBMASTERS and CUE LISTS

If a submaster is set to Intensity Master, why do I not have a flash or bump button?  Can you give the top button a toggle state so that we may choose between GROUP SUB select and BUMP?

Same thing with cue lists on playbacks.  I understand you only provided two buttons to work with...  It would be nice to have a toggle mode for the top button so I could GO to the cue in the list i want, then bump it on with the button or ease it in with the fader.

Parents
  • If I record a submaster in Intensity Master mode will it only record intensity. My thought is that I could record in IM and then switch to Proportional in order to use the bumps and sliders for intensity only.
  • in reply to Bernie
    no, it will not only record intensity. that's not what an I-Master does. making a sub an I-Master means that the slider controls intensity while the bump-button controls the non-intensity parameters.
    to only have intensity on a sub you will need to selectively record. there are many ways (including cleaning up the sub afterwards), e.g. Chan 1 Thru 10 Intens Record Sub 1 Enter
Reply
  • in reply to Bernie
    no, it will not only record intensity. that's not what an I-Master does. making a sub an I-Master means that the slider controls intensity while the bump-button controls the non-intensity parameters.
    to only have intensity on a sub you will need to selectively record. there are many ways (including cleaning up the sub afterwards), e.g. Chan 1 Thru 10 Intens Record Sub 1 Enter
Children
No Data
Related

www.etcconnect.com