Tab control in Ion Offline

There is no reason that this shouldn't work. If you use the [Tab] key alone, does it cycle through the open tabs? And if you use the arrow keys in Live table, does the display pan left and right? This is just to prove that the keystrokes are getting through to the application.

This shouldn't affect anything, but updating the console and the Ion to the latest version is probably a good idea, there have been a lot of bug fixes and improvements since 1.9.5.

-luke-

The Tab key works to cycle open tabs in the same screen and the arrow keys work in a wide Blind spreadsheet.

I was going to follow my usual practice of not updating during the creation of a show.  But as it happens, the Ion started cacking on me today, so I am going to update the console and Eos software on the Ion, and the offline software as well.

Thanks,

Paul

I just updated to the latest offline software, and am still unable to move tabs between screens.

Paul

I'm thinking operator error since this feature has always worked on any console and any version of software I have ever used.

1. Bring up the tab you want to move by pressing the tab key until the desired tab is visible on the screen.
2. Hold down the tab key, and while holding the tab key, press the left or right arrow.
3. Release both keys.

If that fails to work, please describe exactly what you are doing, with which keyboard, and if that keyboard is not the one on the console face, whether the scroll key is enabled 

I realise that this is quite an old thread now, but after coming upon the same problem myself, and not finding a posted solution, I did a bit more digging as it was really starting to annoy me.

What I have found is that if you have any of the 'Virtual Controls' open 'above the CIA', the software will not allow you to move a tab across to the screen that houses the CIA. The solution appears to be open your virtual controls using any option other than 'Above the CIA'

Ian

the same would happen if you open two sets of direct selects on the secondary screen, one top, one bottom. the screen is then full and not available for tabs anymore. solution to this is to use Displays>Browser>Virtual Controls>Close Module. you can have the various virtual controls opened in a tab instead of a fixed monitor position.

ueli