offset is not correctly selecting channels when the selection includes thru and plus
it does not select the correct channels. Instead it selects the first set in the offset.
I tried this on an existing show file and also offline on a new file.
offset works fine if you only use through.
offset works fine if you record the selection as a group
example
ch 1 thru 3 plus 21 thru 23 offset 3/2 selects channel 1 and 21 instead of 2 and 22
I also tried
ch 1 + 2 + 3 offset 3/2 selects channel 1
Eos 8k primary and backup
1.9.11
[edited by: Druuka at 5:38 PM (GMT -6) on Wed, May 30 2012]
