I have an HES (An ETC company) SolaFrame Theatre unit in for demo purposes. I have a few notes on the profile for this fixture:
1) Frames B and C are swapped
2) Some of the gobo patterns in the fixed wheel are wrong, 5 shows up as Cone instead of Stars, 6 has Stars instead of Modern, 7 has Modern instead of Crescents.
3) The encoders for Gobo Mode and Index/Speed are on the encoder page with the fixed wheel, not on the page with the rotating gobo wheel.
-Gregg
HI Gregg,
I'm working in v2.9.0 investigating the SFT issue you are experiencing and I'm wondering if you can help specify what parameters you are altering in ML controls. There are 4 blades total, each with two parts (dmx channels 19-26). If you alter the Angle C/Thrust C parameter in ML Controls, you should see parameters "Frame a 3" and "Frame b 3" change in value in About for that channel. If you are seeing "Frame a 2" and "Frame b 2" change in value when moving the Angle C/Thrust C encoder in ML Controls that is unusual and the profile is not working as expected.
I see, too, there are parameters for Frame Rotation. Can we confirm that these parameters (DMX channel 27 and 28) have homed to 0?
