Artfox Sky Beam 9R

I quickly checked in v3.1.1 and the values are as in the manual.

Checking with v2.9.3, values are the same.

---

Just to be sure... after hitting {lamp off} you need to hit [Enter] to confirm. 

Yes I did hit enter after hitting {lamp off}.  I use this same function to lamp off out Vari*Lite VL1100 ARC ERS's often, as well as our Elation Platinum Beam 5R's so I'm used to having to confirm with Enter.

Ok, good to know.

What you can check next is if the LampOff is given longer, like 4-5Sec, if it is working.

And the other thing i am thinking of is, the DMX-value has a range.
You could also try out if it is working when you send the LampOff-Value at, for example, 205.

That are some try-out work arounds...

Ok, good to know.

What you can check next is if the LampOff is given longer, like 4-5Sec, if it is working.

And the other thing i am thinking of is, the DMX-value has a range.
You could also try out if it is working when you send the LampOff-Value at, for example, 205.

That are some try-out work arounds...