19PCS 15W Beam Wash LED Moving Head

Of course I need something now in order to get the units I now have setup on our stage to work.

Try Eurolite LED TMH-X4

The specs look promising for the parameters 1 - 20, 22, and 24.  Not sure about the other 2, but will try it and advise.

I used the LED MH-X4 (3Cell) profile from the library as a base and modified it to match our new fixtures.

I include my show file file (which contains the working profile for our new fixtures).  Hopefully it will help to get this put into the library in a future release.

In testing I had to reverse the way the zoom function worked.  

I also had to change the color effects channel to match this fixture.

Finally I changed some of the labeling to make it clearer.

I think that is all the changes.

The manufacturer of this fixture is Cheng Wen and best I could tell the model number is CW-LM1908.

The manual from Wayu is identical.  Go figure.

202209116 FOW withNewChinese Lights 2022-09-16 17-56-48.esf3d

I copied and modified the suggested profile to get it work for our fixtures.

The manufacturer is Cheng Wen Photoelectric  and best I could tell the model number is CW-LM1908.

In the next response is a copy of our show file with new fixture profile.

The profile is the one associated with channels 553 and 557.

4846.202209116 FOW withNewChinese Lights 2022-09-16 17-56-48.esf3d

Sorry for the repeats in my reply.  ETC initially blocked the show file attachment messages but now restored them.  I didn't immediately realize what was happening.

So I am no longer in a hurry to get an updated library profile. 

My question now is:  Do I accept or reject the "answer" ueliriegg provided?  It was certainly very helpful.  I'm thinking I will do nothing till I learn that a library profile is made, but I'm not sure what the norms are on this forum, so I'm open to suggestions.

Correction:  I did use the Eurolite LED TMH-X4 (3Cell) library profile as the base for the Cheng Wen 19x15 moving head fixtures.

Sorry for the repeats in my reply.  ETC initially blocked the show file attachment messages but now restored them.  I didn't immediately realize what was happening.

So I am no longer in a hurry to get an updated library profile. 

My question now is:  Do I accept or reject the "answer" ueliriegg provided?  It was certainly very helpful.  I'm thinking I will do nothing till I learn that a library profile is made, but I'm not sure what the norms are on this forum, so I'm open to suggestions.

Correction:  I did use the Eurolite LED TMH-X4 (3Cell) library profile as the base for the Cheng Wen 19x15 moving head fixtures.