Multi-Part Cue

A channels parameter can only have one move command in a cue.
So you can take the mover intensity out in one cue but not bring the intensity back up in the same cue.

You'll need to make a follow on cue for the intensity.

Are you using Auto Mark?

You could take the Incandescents down in part 1, mover out quicker in part 2. Auto Mark will do its thing. Add a Hang time of 0.5 say and make a Cue 6.1 which brings the mover back up. A mark time in setup is your best option at this point.

I can add more details if needed but this is the quickest and easiest way when you're just starting out.

Thanks Nick.  Your solution is what I ended up doing anyway.  But now I also know that I am only allowed the one parameter change per channel.  There are many days that I wish that I had more than one cuelist.   Thanks again.

Thanks Nick.  Your solution is what I ended up doing anyway.  But now I also know that I am only allowed the one parameter change per channel.  There are many days that I wish that I had more than one cuelist.   Thanks again.