FADER MACRO

Eos-Family? "Fader 1/5 At 30 Enter" will move the 5th fader on fader page 1 to 30%

I need the same macro to be able to raise a fader and then that same macro can lower it.

This is so that ETC Response Analog I/O can handle a fader with the same input.

what type of record target is assigned to the fader? a sub?

A preset with house light.

you can change the timing behavior of the fader to Hold and your macro (it needs to be learnt!) is simply pressing the bump button.

you can change the timing behavior of the fader to Hold and your macro (it needs to be learnt!) is simply pressing the bump button.

I made it but the problem is the fader don't work only the information. I would need the fader work too.

that will only work with multiple macros. you can always target the same macro, but that macro -after doing its job- will replace itself with another macro.

Thanks so much Ueliriegg!!!

I will try it.