FADER MACRO

Eos-Family? "Fader 1/5 At 30 Enter" will move the 5th fader on fader page 1 to 30%

I need the same macro to be able to raise a fader and then that same macro can lower it.

This is so that ETC Response Analog I/O can handle a fader with the same input.

what type of record target is assigned to the fader? a sub?

A preset with house light.

you can change the timing behavior of the fader to Hold and your macro (it needs to be learnt!) is simply pressing the bump button.

I made it but the problem is the fader don't work only the information. I would need the fader work too.

I made it but the problem is the fader don't work only the information. I would need the fader work too.

that will only work with multiple macros. you can always target the same macro, but that macro -after doing its job- will replace itself with another macro.

Thanks so much Ueliriegg!!!

I will try it.