Express 48/96 video problem

 Hello there,

Betwen this and the disk drive problem you have reported in a separate post, I'd say you are having a hardware failure of some sort beyond what we might be able to help you with in these forums. You should look to contact the closest ETC dealer to make arrangements for a repair.

Please advise if you need assistance in locating a dealer or reference the below link:  

http://www.etcconnect.com/contact.aspx

Sincerely,

Mike Meskill

European Service Manager, ETC

LOL...Just saw that you posted this on the other thread:

"We were able to solve the " no video problem " by the way by trying to heat up the processor pins. It came out that one or several pins have either cold solders or due to normal wear resulting from transporting the console when used in rental shows."

Kudos to you

Helo Mike!

Many thanks for the fast response. As we speak, the console with the video problem is working fine now. We tried heating up the video cpu pins and was able to solve it. Maybe due to cold solder or normal wear when transported for remtal purposes. But was a relief!

Now it is the other console with the disk problem we are after but i think we are at the end of the line. I will try your suggestion.

More power to you guys!

Any chance i can get a replacement mother board instead? Just trying my luck anyways! LOL