An odd situation in which I find myself currently - wysiwyg R25 and Whole Hog 3

Jim...

Any particular reason you're using the "Custom" Color blast for the CB12?

I use 30 CB12's and have only ever used the Generic RGB LED and it works great and you get the Virtual Intensity and full color mixing along with the I Red, I Blue and I Green.

Not sure why you're seeing what you're seeing, but I just thought I'd ask...

Jon

Ha - no reason, I just saw it in there and figured "hey, that must be it!"
I am changing it as we speak!

It was great to see you at LDI, mang!

You too...hit me up next time you're in Cali!

Gonna go with Jon, Jim.

That was probably a profile built for an RGB(A) LED fixture. THE Generic RGB fixture is what most people use for ColorBlast fixtures. That profile should give you your three colors as well as an overall intensity control.

In case you're unaware (though I doubt this is the case), you'll be able to control your CBs using any of the three color methods available on the console:

-CMY w/ Intensity
-HSI
-RGB Intensity

While the console can get between these different models, I would suggest that you pick one method and stick to it in your programming.

If you write a cue with CMY settings and then a cue with HSI settings, the crossfades can sometimes get weird. This is especially true if going from RGB to the other two color models, as the desk things of RGB as three intensity channels. (This also means that RGB Intensity settings will not save as color palettes by default...you'll need to save them as intensity palettes or press 'Use I' (for Intensity) when saving your color palettes.

Hope your gig goes well and please give me a ring if you have any questions.

Cheers,

Phil