Smartfade ML W/ American DJ profile panel issues.......

Hi there -

This type of fixture will require that you use 8 device channels to control the 8 sections individually. SFML cannot control the separate sections under one device number.

Thanks much -

Sarah

Hi Sarah,

Could You trick the board into thinking that fixture's DMX is not that it is? EX. Fixture's DMX channel for the 4th block: dimmer, Board's attribute fader: frost?   Does that make sense?

Thanks!!!!!

Hi Sarah,

Could You trick the board into thinking that fixture's DMX is not that it is? EX. Fixture's DMX channel for the 4th block: dimmer, Board's attribute fader: frost?   Does that make sense?

Thanks!!!!!

Hi there -

Yes, technically you can build the profile any way you want to, however if you plan to use palettes or effects it could become quite complicated since you're now controlling color parameters on non-color faders, if you know what I mean. You'll have to determine what's going to work best for you in your situation.

Thanks much -

Sarah

Hi again,

Coming from an expression 3 the word, effects, Kind of throws me. What is an effect on the SFML? Thanks again, and many more times in the future!!

Thanks!

Hi there -

I would recommend you take a look at our tutorials. :-) They should be helpful and answer a bunch of questions.

http://www.etcconnect.com/support.tutorialseries.aspx?seriesId=3

I hope this helps!

Sarah